Introduction
"Standard" hopper dryers offer an effective and low-cost method for plastic material drying. Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles. They can be directly mounted on the moulding machine for quick drying and space saving. For this series, hot air blows evenly from bottom to the top of the hopper with capacity ranging from 12~1,000kg, Optional 24-hour timer is available for each model.
Features
1. Adopt hot air diffuser to gain an even hot air low to improve drying efficiency.
2. Unique hot air inlet below design can prevent dust piling up at bottom of the pipe heaters so to avoid burning.
3. All material contact surfaces are made of stainless steel to eliminate material contamination.
4. P.D. temperature controller for accurate temperature control.
5. Overheat indicator, blower contactor and overload delay are standard equipments.
6. SHD-300 and below models are equipped with standard base. SHD-400 and above models are equipped with magnetic base.
7. 24 hours auto start/stop timer and double insulated hopper are available as options.
Model | Capacity (kg) | Heater Power (kw) | Blower Power (w) | Dimensions (mm) | Adaptable Injectioner | Weight (kg) |
SHD-25 | 25 | 2.7 | 120 | 725*405*950 | 60-152 | 38 |
SHD-50 | 50 | 4 | 180 | 840*490*1070 | 125-500 | 75 |
SHD-75 | 75 | 4.8 | 180 | 900*550*175 | 300-500 | 85 |
SHD-100 | 100 | 6 | 250 | 955*605*1410 | 1000-1500 | 95 |
SHD-150 | 150 | 7.5 | 250 | 960*610*1560 | 1500-2000 | 120 |
SHD-200 | 200 | 12 | 350 | 1230*770*1660 | 2000-2500 | 150 |
SHD-300 | 300 | 15 | 400 | 1335*870*1810 | 3000-4000 | 200 |
SHD-400 | 400 | 18 | 450 | 1360*915*1870 | 3000-5000 | 225 |
Internet Marketing By Netcec& Bossgoo